财政支出、电力消费与农民收入的时空特征分析

本文将财政农业人均支出和农村人均用电量作为解释变量,农民人均纯收入作为被解释变量,利用2000-2005年中国31个省、市和自治区的有关时空数据,建立相应的空间自回归模型.模型数据统计分析表明:a)农民人均纯收入不仅存在空间自相关的特点,而且具有异质性;b)农民人均收入对财政农业人均支出、农村人均用电量存在明显的空间依赖性;c)用财政农业支出和农村用电量来反映农民收入水平十分有效,且都具有显著的正面影响.据此,文章提出了一些有针对性的提高农民收入的政策建议.     

我国经济增长与产业结构演进关系的研究——基于面板数据模型的实证分析

本文运用面板数据模型,对我国各省1996-2005年人均GDP及三次产业产值比重的关系分别进行了模型拟合,结论认为:我国经济增长对产业结构变化的影响显著,而后者对前者的影响在统计上并不显著,我国经济增长模式是需求导向型的。其次,就各次产业与人均GDP的关系看,第一产业与人均GDP呈现负相关关系,而第二、三产业与人均GDP呈现正相关关系。     

Contact Interaction Between a Laminated Shell of Revolution and a Rigid or Elastic Foundation

A method is proposed to solve the contact problem for laminated anisotropic shells of revolution. The method is based on a two-dimensional model that accounts for transverse shears and reduction. Also the method is based on the method of successive approximations, the generalized pseudo-force method, and a numerical-analytical method of solving boundary-value problems. The results obtained for a cylindrical shell of complex thickness structure are compared with those obtained in three-dimensional formulation__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 5, pp. 68–75, May 2005.     

刚体位移对应变测试的影响

通过运用波前干涉理论,得到了贴片云纹干涉法测圆柱壳的位移与应变公式,分析了刚体位移及曲率对测试结果的影响情况.指出了在对压力容器及管道进行测试时应注意的事项.     

The ultimate state of polymeric materials and laminated and fibrous composites under asymmetric high-cycle loading

The prediction of the high-cycle fatigue strength of polymeric and composite materials in asymmetric loading is considered. The problem is solved on the basis of a nonlinear model of ultimate state allowing us to describe all typical forms of the diagrams of ultimate stresses. The material constants of the model are determined from the results of fatigue tests in symmetric reversed cycling, in a single fatigue test with the minimum stress equal to zero, and in a short-term strength test. The fatigue strength characteristics of some polymers, glass-fiber laminates, glass-fiber-reinforced plastics, organic-fiber-reinforced plastics, and wood laminates in asymmetric tension-compression, bending, and torsion have been calculated and approved experimentally. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 44, No. 1, pp. 87–102, January–February, 2008.     

Numerical treatment of retarded boundary integral equations by sparse panel clustering

Stefan Sauter Institute for Mathematics, University of Zürich, Winterthurerstrasse 190, CH-8057 Zürich, Switzerland ^{We consider the wave equation in a boundary integral formulation.The discretization in time is done by using convolution quadraturetechniques and a Galerkin boundary element method for the spatialdiscretization. In a previous paper, we have introduced a sparseapproximation of the system matrix by cut-off, in order to reducethe storage costs. In this paper, we extend this approach byintroducing a panel clustering method to further reduce thesecosts.}     

Shear buckling modes of cylindrical sandwich shells under external pressure, tension-compression of bearing layers with unequal forces, and inhomogeneous across-the-thickness temperature

Equations are set up for describing, in a correct statement and with an accuracy sufficient in actual practice, the shear buckling modes (BMs) of cylindrical sandwich shells with a transversely soft core of arbitrary thickness. Based on them, solutions are obtained to a number of problems on the buckling instability according to shear modes under some force and thermal loadings. It is found that the BMs occur in the shell along the circumferential and axial directions if, in the precritical state, a normal compressive stress arises in the transverse direction. It is shown that this condition is fulfilled in the following cases: in axial tension of the shell with unequal forces applied to the end faces of bearing layers (the parameter of critical load is maximum if the tensile forces are equal); under external (internal) pressure; on cooling the outer and heating the inner layers. The results obtained are presented in the form of simple analytical formulas for determining the corresponding critical parameters of the force and thermal actions.Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 1, pp. 37–48, January–February, 2005.     

Application of Discrete Fourier Series in the Stress Analysis of Cylindrical Shells of Variable Thickness with Arbitrary End Conditions

An approach is proposed to solve boundary-value stress—strain problems for cylindrical shells with thickness varying in two coordinate directions. The approach employs discrete Fourier series to separate circumferential variables. This makes it possible to reduce the problem to a one-dimensional one, which can be solved by the stable discrete-orthogonalization method. Examples are given __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 6, pp. 85–94, June 2005.     

毫米波圆柱波导自由电子激光放大器的数值模拟

本文以单粒子理论为基础，在不计空间电荷效应的近似条件下推导了带轴向引导磁场的三维圆柱波导非线性模拟方程组。用CAGFEL程序计算、分析了在带入口区、常数摇摆器条件下两组不同物理参数的自由电子激光放大器的物理模型。计算结果可靠，物理图象合理。对于其中的第二组参数还着重考查了光波频率、输入功率和摇摆器场振幅改变对输出功率和效率的影响。上述这些计算结果对0．7MeV 自由电子激光放大器的设计和实验具有一定的参考价值。     

环形磁场金属等离子体源冷却流场的数值模拟与优化

环形磁场金属等离子体源作为一种全新的等离子体源结构,可用于产生高度离化、无大颗粒、高密度的离子束流,但传统流道结构不能保证其高效、均匀散热,大功率工作时可能引起密封胶圈的烧蚀失效,需对其冷却流场进行优化设计.利用Solidworks Flow Simulation软件对等离子体源冷却流道进行模拟,分析出入水孔分布角度、孔数、孔径以及入水孔高度对冷却效果的影响规律,并对流道结构参数进行优化.结果表明,增大水孔的周向分布范围,有利于提高散热的均匀性;入水孔设置在结构上层有利于减少冷却水的温度分层现象,使铜套和密封胶圈都处于较好的冷却状态;适当减小孔径有利于增大冷却水射流速度,增大湍流程度强化传热,提高换热效率.优化后的流场结构可以提高冷却水的利用率,在相同流量条件下获得更好的冷却效果,改善等离子体源的放电稳定性,为环形磁场金属等离子体源的冷却结构设计提供理论依据.